Super clear lamination film
Price on Request
Technical-grade super clear lamination film roll stock is engineered for high-visibility surface protection and industrial composite overlays. Delivering glass-like optical clarity, this heavy-duty material provides a reliable barrier against moisture and surface wear across high-volume manufacturing lines.
- Thickness Range: 0.6 mm – 3.0 mm (Calibrated precision gauges for structural overlays)
- Width Parameters: 1.0 m – 2.0 m master rolls (Precision slitting to project specifications)
- Hardness Profile: 22 – 60 PHR flexible polyvinyl chloride (PVC) formulations
- Compliance Standards: Material batches adaptable to meet REACH, RoHS, and EN-71 protocols
- MOQ: Negotiable per specification — contact sales for your target volume.
- Production Lead Time: Varies by product specification and order requirements — contact sales for an estimated timeline.
Description
Super Clear Lamination Sheet
Wholesale | Winter PVC
Super clear lamination
sheet is a high-performance PVC material engineered for industrial applications requiring exceptional
transparency, surface protection, and visual clarity. Combining outstanding light transmission with durable waterproof
performance, this premium super clear lamination PVC sheet enhances product appearance while
shielding substrates from stains, moisture, and daily wear.
Terminology
note: film and sheet are different product categories. This product is supplied at 0.6–3.0 mm, which falls
into thick-gauge sheet form. It is sometimes listed by suppliers as super clear lamination
film, but the correct classification for this thickness range is sheet grade.
Product
Overview
Manufactured for heavy-duty
surface shielding and commercial overlays, this sheet is available in highly polished, high-gloss profiles. It is
commonly used by furniture manufacturers, decorative panel producers, and industrial converters requiring customizable
transparent PVC sheet specifications for technical lamination phases. Because it is sheet grade
rather than film grade, it holds its own form at heavier gauges and can be flat-bed laminated, hot-press laminated,
CNC cut or die cut without a carrier.
Film or Sheet?
Selecting the Right Product Form
Film and sheet are specified
differently because they differ in thickness, form, stiffness and downstream process. Use the table below to confirm
which category your application requires.
| Item | PVC Film | PVC Sheet (this product) |
|---|---|---|
| Thickness | Up to 0.60 mm | 0.60 mm – 3.00 mm |
| Typical form | Flexible roll stock | Thick-gauge sheet / semi-rigid roll |
| Stiffness | No self-support | Self-supporting at heavier gauges |
| Downstream process | Wrapping, printing, bag making | Flat-bed lamination, hot-press lamination, CNC cutting |
| Typical use | Packaging windows, overlays, wrapping | Panel faces, furniture fronts, machine housing, cladding |
If your process wraps, prints or
bags, you need film grade — see our super clear PVC film range.
Technical
Specifications
| Property | Specification |
|---|---|
| Product Type | PVC Sheet (thick-gauge sheet grade) |
| Thickness Range | 0.6 mm – 3.0 mm |
| Thickness Tolerance | Industry-Standard Gauge Control |
| Width Range | 1.0 m – 2.0 m |
| Hardness (PHR) | 22 – 60 PHR |
| Surface Finish | High-Gloss, Polished, Smooth (non-textured) |
| Optical Property | Exceptional light transmission with high optical clarity |
| Color Options | Super Clear Transparent, Crystal Clear, and Custom Options |
| Key Properties | Superior surface protection, waterproof, anti-block options |
| Form of Supply | Roll |
Full mechanical, optical and
thermal test values are issued on the technical data sheet for your order. Contact our technical team for the TDS of
your target thickness and PHR grade.
Selecting
Hardness (PHR)
PHR (parts per hundred resin)
expresses how much plasticizer is compounded into the PVC. It is the primary control for stiffness in this product,
and the same nominal thickness can be supplied rigid or flexible depending on the grade you specify. This product is
available across 22–60 PHR.
| PHR Band | Material Character | Where It Is Usually Specified |
|---|---|---|
| 22 – 30 | Rigid to semi-rigid | Applications needing stiffness or shape retention after forming |
| 30 – 45 | Semi-rigid | General panel overlay and surface finishing |
| 45 – 60 | Flexible | Applications requiring drape, conformability or impact tolerance |
Tell us your forming depth,
substrate and required stiffness and we will recommend the appropriate grade.
Key Features
& OEM Capability
Winter PVC supports precision
manufacturing tailored to your target technical parameters. To evaluate how base polymer clarity aligns with global
buying frameworks, you can review our technical guide on What Is PVC Film? Applications,
Manufacturing Process & Buying Guide. For a deeper analysis of how precise chemical formulations, tensile
elongation, and plasticizer levels coordinate with machinery settings, see: PVC Film Properties:
Tensile Strength, PHR Hardness & Compliance. Our core advantages include:
- Premium flatness with specialized anti-block formulations to eliminate winding stiction.
- Outstanding optical clarity delivering glass-like visual transparency and precise color fidelity.
- Fully customizable material options including thickness, width, and tailored hardness profiles.
- Sheet-grade stiffness at heavier gauges — no carrier required during processing.
- Comprehensive ODM/OEM contract manufacturing support designed for large-scale conversion lines.
Industrial
Applications
For procurement managers auditing
roll stock consistency during thermal bonding, explore our processing report: PVC Film Manufacturing Process: A Procurement Guide for Industrial Buyers. To map out
cross-industry deployment parameters across global distribution chains, see our detailed PVC Film Applications Guide | Industrial PVC Films for Packaging, Lamination & Surface
Protection. Primary configurations include:
Panel & Surface Lamination
- Construction profiles, door panels and furniture fronts
- Rigid industrial panels and machine housing lamination
- Heavy industrial cladding and structural panel faces
- Industrial-grade rigid sheets and chemical containment
Transparent Barrier & Protection
- Industrial strip doors and curtains
- Clear partitioned processing areas
- See-through machine guards and equipment shielding
- Protective transparent overlays for printed and decorative panels
Troubleshooting: Blistering, Orange Peel and Shrinkage
| Defect | Likely Cause | Corrective Action |
|---|---|---|
| Blistering / trapped air | Insufficient nip pressure; moisture in substrate; line speed too high | Increase nip pressure progressively; pre-dry the substrate; reduce line speed |
| Orange peel finish | Under-heating or uneven heat distribution | Raise substrate temperature within your process window; verify heater uniformity |
| Edge shrinkage / waviness | Excessive web tension; uneven cooling | Reduce web tension; extend the cooling zone |
| Loss of clarity / haze | Surface contamination or overheating | Clean rollers; keep temperature inside the recommended window for the selected grade |
| Poor adhesion | Low substrate surface energy; surface contamination | Clean the substrate; consider priming or corona treatment |
| Excessive sag during forming | Temperature too high for the selected PHR grade | Select a lower PHR grade, or lower the forming temperature |
Recommended process temperatures
depend on your PHR grade, sheet thickness and machinery. Submit your parameters and our technical team will confirm a
starting window.
Compliance & SGS Quality Assurance
Winter PVC ensures that raw material batches are
strictly managed to meet international chemical safety protocols, providing stable deployment in regulated export
markets.
📊 SGS Test Report Data Summary:
- Report Number: CANEC26010536001
- Sample Name: Super Clear Lamination PVC Film
- Testing Standard & Method: EN 14372:2004 via GC-MS Analysis
- Phthalate Screening Results: 21 regulated phthalates and related substances tested — Result: ND (Not Detected)
Procurement
& Commercial Terms
| Commercial Item | Details / Terms |
|---|---|
| MOQ | Dependent upon specific custom parameters and technical specifications (Contact Sales) |
| Production Lead Time | Scheduled according to order specifications, current factory capacity, and batch volume |
| Sample Support | Material evaluations are supported subject to project review and current roll inventory status |
| Packaging | Export Standard Roll Packaging |
| OEM / ODM | Fully Supported |
Frequently
Asked Questions
Q1: Do you supply this product as film or as sheet?
A: Sheet. This product is supplied at 0.6–3.0 mm, which falls
into thick-gauge sheet form. If you need a thinner material for wrapping, printing or bag making, our super clear film
range is the correct category.
Q2: What thickness options are available?
A: Standard production ranges from 0.6 mm up to 3.0 mm.
Achieving heavier gauges and custom profiles depends on your required hardness (PHR) and a manufacturing feasibility
review.
Q3: Which PHR hardness should I specify?
A: PHR controls stiffness. Lower PHR gives a more rigid sheet,
higher PHR gives a softer, more flexible one, and this product is available from 22 to 60 PHR. Share your forming
depth, substrate and required stiffness and we will recommend the grade.
Q4: What is the difference between super clear lamination sheet and clear
lamination embossing sheet?
A: Super clear lamination sheet has a high-gloss, polished,
smooth surface and is specified when maximum optical clarity is required. Clear lamination embossing sheet
has a fine embossed texture and is specified when a decorative or matte surface effect is wanted.
Q5: Is this the same product as your PVC table cover sheet?
A: No. This is a high-gloss lamination and overlay sheet for
bonding onto panels and industrial substrates. For consumer tabletop products, see our plastic table cloth
range.
Q6: Is this sheet suitable for high-frequency welding or thermal
lamination?
A: Suitability depends on the PHR grade and your machinery
settings. Flexible grades in this range are commonly used with HF/RF welding and thermal bonding, while rigid grades
are specified for hot-press lamination. Submit your technical parameters and we will confirm compatibility for your
process.
Q7: Can samples be provided before bulk orders?
A: Yes, we support material evaluations for feasibility testing.
Sample provision is coordinated upon project review to ensure the material matches your technical parameters and
current inventory availability.
Q8: Do you support OEM and ODM manufacturing?
A: Yes. Thickness, width, hardness, surface finish, and color
can be fully customized according to industrial buyer requirements.
Q9: Are official compliance documents available?
A: Yes. Relevant compliance documentation, factory certificates,
and original SGS testing reports can be provided upon business request.
Request Factory Pricing & Sample Support
To receive pricing, sample rolls, or technical
factory recommendations, please provide your target required thickness, required width, hardness (PHR),
surface finish, intended application, and estimated order quantity.
Our technical team will review your
requirements and provide a suitable quotation within 12 hours.
Additional information
| Thickness | 0.6mm-3.0mm |
|---|---|
| Width | 1.0m-2.0m |
| PHR (Parts per Hundred Resin) | 22-60 |
| Color | Tailored to your requirements |
| Thickness Tolerance | Industry-Standard Gauge Control |
